Laser Marking|Laser Scribing|Laser Drilling|Laser Cutting|laser ablation :: Home :: Products :: NANO FAKTUR :: EBD-120 Digital Controllers

NANO FAKTUR

Click here download the file

EBD-120 Digital Controllers

nanoFaktur is introducing its new line of digital controllers. Customers´ demands have consequently been realized with this. Starting with the enclosure: All interfaces are placed on the front side, so that wiring- and access space can be saved decisively. There are shackles on both the back and on the bottom, so that the most practical integration can be chosen.

The second-generation EBDs are available for driving and reading strain-sensors and capacitive sensors. The achievable resolution is 5 ppm (rms) of the systems´ nominal ranges. Internal algorithms allow for linearization after characterizing with reference measurement-systems. At nanoFaktur, highest-accuracy probes referring to official standards are being employed as references. Thus systems can be linearized to better than 0.01% of their respective full displacements.

Detail

Product Numbers	EBD-1202×0 (x=number of channels)	Unit

Channels	1-3
Output Voltage for Piezo	-45 to 180	V
Sensors	Strain-Gages (SGS) or Capacitive (Cap)
Control Parameters	PID, 2 Notch Filters per channel
Control Loop Time	10	µs
Software	nFControl, Windows™ GUI
GUI Operating System Requirements	Microsoft ® Windows™ 7/8/10
Resolution	20 bit
Wave-Generators	arbitrary, 1..3 generators, up to 1024 tables
Data-Recorders	up to 16
Memory	16M points for wave-/recorder-tables
Current	300	mA
Average Current	120	mA
Protection	short circuit proof
Supply	24 (2A min.)	VDC

Digital Interfaces	Ethernet, USB 2.0, RS232, Parallel (optional)
Analog Interfaces I/O	Input settable, -10 to 10, -5 to 5, 0 to 10, Output -5 to 5	V
Connection, Piezo and Sensor	DSub15f (1 CH), DSub25f (2, 3 CH)
Connection, Analog I/O	2x BNC (1 CH), DSub15f (2, 3 CH versions)
Connection, P/S	SwitchCraft RASPC10PS
P/S, counter-socket	SwitchCraft PowerJack S10KS12

Power Supply	external, included
Ambient Temperature	10 to 40	°C
Design	aluminum black
Dimensions, H x W x D	73 x 200 (215 incl. shackles) x 157.5 (plus interfaces)	mm
Standards	2006/95/EC, Low Voltage Directive 2004/108/EC, EMC Directive 2011/65/EU, RoHS Safety (Low Voltage Directive): EN 61010-1:2010 EMC: EN 61326-1:2013 RoHS: EN 50581:2012

Specification

All digital controllers of nanoFaktur have the ID-Chip feature: Characteristic data of the mechanics are stored on a chip in the connector of the mechanics. The controller detects, if a connection has been changed, then reads the data from the chip and the newly connected mechanics can be controlled. The main advantage of this feature is: Mechanics can be exchanged.
The controllers offer several ways of communication. The digital ones are Ethernet, USB, RS232 by default, plus the optional real-time parallel I/O. Also, real-time analog interfaces are integrated as standard: position inputs and sensor-monitor outputs. Programmable digital I/Os allow for generating trigger-signals in order to assign positions to time, which is ideal in combination with the built-inarbitrary wave-generators.

nanoFaktur digital controllers can be tuned easily by the users. System characteristics under specific conditions (load, orientation) can be measured with the included graphical user interface (GUI) software nFControl. P-I-D gain parameters and 2 notch-filters can be set to achieve optimum behavior and fastest response. Besides the GUI, there is a DLL for integration of the communication with nanoFaktur systems into customers´ software or other platforms like LabView™. The controllers can be driven via ScanImage using the analog inputs set to -10.. 10V.

<< Go Back